BLADEZ prisma Supra Bedienungshandbuch PDF herunterladen (Seite 15)

Once you have completed the above, tighten the top knobs (29) securely, by

turning them clockwise and the bottom knobs (29), by turning it clockwise, Fig.5.

Assemble the side supports

Bring the side support (35) up to the main structure, position it on the holding pins.

Next, use the Allen wrench (26) to tighten the screws (74) and washers (101)

To the foot rest. Perform the same assembly operation with the other foot rest

Fig.6.

Fig.5 Fig.6

Assemble the handrails.

First, take the combination box wrench (28) and loosen screw, located on the

base of the handrail (9 and 10), a few turns in an counter-clockwise direction.

Rotate the handrails (9 and 10) in the direction of the arrows.

Once the handrails are positioned, use the box wrench (28) to retighten screws

securely Fig.7.

ATTENTION: Cylinder (21) is packed under high pressure so it must not be

knocked. If it is knocked this may damage it and impair the operation of the

treadmill Fig.8.

Fig.7 Fig.8

ASSEMBLY INSTRUCTIONS (cont’d)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 29 30

Keine Kommentare

BLADEZ prisma Supra Bedienungshandbuch Seite 15