BLADEZ E-LITE 250 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 12)

Page 12

For regular adjustments:

1. Using a 16mm wrench, loosen the axel

bolts on each side of the rear wheel (Fig.

9).

2. While the axel bolts are loose, using a

10mm wrench loosen the tension bolts

behind the rear wheel of the XTR Lite and

move the rear wheel backwards to remove

the slack for the chain (fig. 10).

3. Once this is achieved the wheel nuts must

then be relocked into position and wheel

alignment must be checked (while turning

the wheel, visually check that the clearance

between the wheel and the frame parts

have clearance).

*Note: Chains that are run excessively dry

or loose can result in sprocket teeth being

severely damaged.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

BLADEZ E-LITE 250 Anleitung zur Fehlerbehebung Seite 12