BLADEZ PB-SM806 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 12)

Page 12

*It is recommended on initial charge to charge for 6-8 hours even if the light is GREEN.

Riding

1. Makes sure that all of the bolts and screws are tightened.

2. Raise the kickstand to its upright position.

3. PRESS THE ON/OFF Button once (Fig 6). The

POWER INDICATOR light will blink RED and then

Turn GREEN (indicating the EX 350 is ON and

ready to ride).

4. Put one foot on the deck of the EX 350. After

pushing off with the other foot, gently squeeze the

ACCELERATOR LEVER, on the right side of the

handlebars. The Power Board will begin to move on

its own power.

5. Your EX 350 has a variable speed throttle lever. You can control the speed of your

scooter by the amount of pressure you use when depressing the throttle lever. The

more you depress the throttle the faster you will go.

6. To stop, release the accelerator handle and depress the BRAKE LEVER (on the left

side of the handlebars). Depressing the brake will temporarily disengage power to the

motor.

7. When you feel your Power Board moving slow, sluggish or running out of power, it is

time to recharge. (See charging instructions)

* Note that there is still charge in the batteries, do not ride any further and recharge your

scooter so you do not damage your batteries.

FOLDING AND STORAGE

8. To fold your Power Board. Using one hand,

gently pull up on the Folding Handle, while

lowering the handlebars with the other (Fig.

7A).

1 2 ... 7 8 9 10 11 12 13 14 15 16 17

Keine Kommentare

BLADEZ PB-SM806 Anleitung zur Fehlerbehebung Seite 12